The OCMA-500 cuts solvent consumption by 20% compared with our previous products, reducing environmental impact. Reduction of environmental impact and running cost.Illuminating the tank makes it easy to check the phase separation between sample and solvent and set the extraction time. Inspection is available, or if you'd like us to perform further tests/checks, please write to us with your set of instructions.ShippingWe ship worldwide.The extraction tank is equipped with LEDs. As we do not have the technical expertise to further test the unit, we are selling it on an 'AS IS BASIS'. The unit powers up with tests and observations as listed above. The OCMA-300 provides swift, highly accurate analysis of the oil content of both fresh water and saltwater as well as that of such fluids as those found at factories and wastewater treatment plants.Application: Oil contamination of fresh and salt water soil analysisPrinciple: Solvent extraction, NDIR analysis (Infrared spectroscopy)Detector: Pyroelectric sensorMeasuring Range: 0 to 200 mg/LResolution:0 to 99.9 mg/L 0.1 mg/L100 to 200 mg/L 1 mg/LRepeatability:0 to 9.9 mg/L ± 0.2 mg/L ± 1 digit10.0 to 99.9 mg/L ± 2 mg/L ± 1 digit100 to 200 mg/L ± 4 mg/L ± 1 digitMeasurement: Automatic after introduction of the oily water sample or manual operation, selectableCalibration: Automatic zero and span calibration after the oily water sample is introduced to the instrumentExtraction Solvent: HORIBA S-316 solvent (Not included)Sample/Solvent Volume: 20 mL/10 mLExtraction Method: Built-in extractor for oily water samplesDisplay: Measured value 3 digits LCD with backlightMessage Character display LCD with back-light (16×2 characters)Functions: Data memory up to 50 data, Self diagnostics, Stable type display, Interactive operation, Calendar clockOutput: Digital display, RS-232C and parallel printer portAmbient Temperature: 0 to 40☌Unit's SpecificsMake: HoribaModel: OCMA-300Part No.: 203003Type: Oil Content NDIR AnalyzerDate of Mfg: 2002Tests and ObservationsPowers up successfullyButtons are tested to be fully responsiveWe are able to start a mock calibration run and the agitator blades spins freelyNote: You will receive the actual unit shownDescriptionThis unit is used and is in overall good physical condition. Using 0mg/l -200mg/l dynamic ranging, the unit is capable of analyzing both high and low concentrations. The OCMA-300 utilizes S-316 extraction solvent to ensure superior oil particle stability and infrared absorptiometry for sample analysis. The one-touch monitoring process is fully automated, from sample extraction to analysis and sample expulsion.

HORIBA OCMA-300 OIL CONTENT ANALYZER NDIR P/N 203003Product FeaturesThe OCMA-300 is an automated portable unit for monitoring oil content in both fresh water and saltwater.

Horiba ocma 220 manual